Shopping Bag:  0 item(s) in bag  /  Total: $0  View Cart   Checkout   
Home > Products > Quad GroTower Kits -

Indoor Quad

Part Number Indoor Quad
Indoor Quad
Email a friend Email a friend
Review this item Review this item
Questions about this item? Be the first to ask here. Questions about this item? Be the first to ask here.
Retail Price:  $1,100.00
You Save:  $275.00
Your Price:   $1,100.00
On sale:: 
On Sale
Choose Options
Frame Pre-cut steel tubing and fittings + $75 shipping [+$175.00]
Tools for building steel frame
Orca Grow Tent
Tank panel
Quantity Price
2 - 3 $783.75
4+ $742.50
Add to Wish List


GroPockets Quad Kit for Indoors

The Quad is a 4 tower aquaponics and aeroponic system with 36 plants in a tiny foot print of only 2ft x 2ft. Used in rotation with the seedling tray you can harvest up to 9 plants a week. Each PVC GroPockets Tower faces a slowly rotating vertical full spectrum LED light in the center. This arrangement with a grow tent provides the ultimate in efficient indoor growing, It uses 90% less power than traditional indoor growing systems.

Can be converted to an outdoor Quad

Grow Light Efficiency
  • Utilizes the most efficient full spectrum LEDs available
  • Innovated design puts lights close to the plants for maximum efficiency
  • The rotating light mimics sun movement and minimize leaf shadowing for fuller plant development
  • Allows plants recovery time to avoid tip burn
  • Rotating lights only need 1/2 the light output
  • Uses the best reflective tent to minimize wasted light
  • Only100 watts to light the equivalent of 30 sq ft of horizontal space
  • Minimizes excessive cooling requirements


  • 36 GroPockets
  • 4 Quad Quick-Mount tower fittings with stainless steel hardware
  • Lighting positioning trolley
  • Rotating light mover
  • Dual full spectrum - ultra high efficient LED lights
  • Tank cover panel
  • Plumbing assembly (including pump) for 4 towers
  • 18 hole seedling tray for top of tank 
  • Printed template for marking pipe
  • 56 seedling plugs
  • 56 net pots

Steel Frame:
The base price does not include a structure to hold the towers. You can build your own from (nominal) 2x4's, 2x2 or 1x4 cedar. Or, we sell a kit of pre-cut galvanized steel tubing with fittings which can be easily assembled. Before assembly, the tubing can easily be painted if desired

The fittings utilize 6mm & 4mm socket head bolts, driving tips are available in the following formats. 
  • T-Tool 
  • 3/8" socket driver 
  • Screw driver bit in standard 1/4" hex size
You can select any driver type or get all 3 for a slight up-charge.

Waterproof Fabric Tank Cover

The quad kit comes with a colored plastic Tank cover, but if you can upgrade it to the waterproof fabric cover.

Grow tent
In order to get good results without the sun it is important to utilize a reflective film surrounding your growing area. Otherwise a large percentage of your precious light bleeds out and is lost. There are a variety of materials that can be used to accomplish this. Even white boards are better than nothing. However, we feel the best option is Orca Growfilm. The Orca grow tent option we provide is a precut sleeve that slips over the outside of your frame. It clamps at the top and bottom of the pipe frame for a secure fit.  Zippers are provided to create access doors to you plants from either side of your Quad.

Does not include:

  • Frame for quick-mount system
  • 4" thin wall PVC pipe (20' feet needed)
  • 32 gallon square reservoir/fish tank
  • PVC Cement
  • Paint for quick-mount system (to resist UV).
Some Building Notes
The Tank:
Pictured in gray. (It also comes in white or red.) This reservoir (marketed as a trash container) is easily obtained on-line (Zoro part number G0160237) or from your local hardware retailer. It is a cube about 22" on a side. As shipped, it has two handles on opposing sides which must either be accommodated in your frame design or cut off. Our illustrations and frame design show the handles cut off. The lack of handles makes it difficult to move the system around. Consequently, you may wish to build a platform on casters and put your entire Quad system on the platform.

Tools you will need:

  • 2" drill bit for holes in towers
  • 11/64" drill bit for attaching quick-mount bases to square reservoir
  • Electric drill
  • Utility knife, hacksaw, and/or dremel tool to cut off 2 handles from LLDPE square tank

Patent Pending

Recently Viewed Items
GroPockets  29508 Lazy Lane, Spring Texas (281) 292-2177
Copyright - All rights reserved 2015-2017